BATTERY CHARGER BCN

Powerful AC-DC connected chargers

ADVANTAGES
UP TO 80A CHARGE,
PERFECT FOR LiFePO4 BATTERIES
CHARGES UP TO 3 BATTERIES
SIMULTANEOUSLY
MONITORABLE FROM TD283 DISPLAY AND MOBILE APP (WITH A BT DEVICE AND NETWORK MASTER PRESENT)
A P P L I C A T I O N S

MAXIMUM CHARGING AND ENERGY EFFICIENCY
WITH THE NEW BATTERY CHARGER BCN CONNECTED CHARGERS.

BATTERY CHARGER BCN

When 230Vac is available, it is important to get the maximum charge for on-board batteries in the shortest possible time. The new Battery Charger BCN (AC-DC) can charge up to 3 batteries at the same time, with an optimised 6-step charging curve, and charge current control via Display Bus DTB01 or NDS | Dometic App Mobile for Smartphones.

The Ci-Bus protocol, compatible with N-BUS, allows the BCN to be integrated into the NDS | Dometic energy ecosystem, sharing useful information for charge monitoring. To use the mobile app, all you need is a Tempra Lithium Battery or a Suncontrol2 Bluetooth and Display DTB01 connected to the N-BUS network.

The incredible charging power, up to 80A (depending on model) of the Battery Charger BCN, is the ideal solution to make the most of the characteristic fast charging of Lithium batteries

(LiFePO4), and by selecting the appropriate charging curve, even Lead/Acid batteries (AGM, Gel, Wet) can be safely charged.

Separate power outputs (excluding the one dedicated to the starter battery) allow innovative flexibility of use: the outputs can be used individually, or added together to obtain maximum nominal charging power.

The 25A model has a separate output dedicated exclusively to charging the starter battery and with the OPTICHARGE, algorithm, it is possible to keep the charger always connected to the mains, charging batteries only when necessary, without stressing them.

MAIN FEATURES:

  • Charges up to 3 batteries simultaneously
  • Controlled by Mobile App and DTB01 Display
  • Charges the starter battery (BCN1225)
  • Suitable for LiFePO4 and all lead-acid batteries
  • OPTICHARGE charging firmware
  • Flexible configuration of power outputs

Models

Model Code Charging current Power Outputs Charging curve Charging type Size
BCN 1225 9620013436 25A 2 Leisure batteries, 1 Starting battery AGM, Gel, Wet, LIfePO4 6 step 238x179x63mm
BCN 1250 9620013434 50A 3 Leisure Batteries AGM, Gel, Wet, LIfePO4 6 step 283×208,5x75mm
BCN 1280 9620013435 80A 3 Leisure Batteries AGM, Gel, Wet, LIfePO4 6 step 303×208,5x75mm

NDS CONTROLLER

Display Bus and NDS App mobile

Devices with N-BUS, protocol, such as POWERSERVICE PSB, can be managed by a single Display Bus (optional) and NDS Mobile App (if there is a Bluetooth NDS device in the same network). Discover how easy it is to control PSB via the Display Bus (or via dip switches): set the desired charge curve, the charge current limit, is always at your disposal, just a click away.

DISPLAY BUS DTB01 (OPTIONAL)

NDS-App-mobile